Air Conditioner and Heater Plumbing for 2007 Dodge Magnum
![Mopar](https://s3.amazonaws.com/static.revolutionparts.com/assets/images/mopar.png)
Liquid Line. Includes: O-Ring. Up To 06/28/2010. Discharge Line. Includes Item # 4.
![Mopar](https://s3.amazonaws.com/static.revolutionparts.com/assets/images/mopar.png)
Hex Flange Lock Nut
Channel Lower. M6x1.00. Included in Sliding Door Glass. Lines to Hvac. After 01-09-2002. Glass to Regulator attaching. Glass Assy. to Window Regulator. Glass atttach to regulator.
![Mopar](https://s3.amazonaws.com/static.revolutionparts.com/assets/images/mopar.png)
Liquid. Includes 1 O-rings and 1 Gasket. Either Suction Line, Accumulator End.
![Mopar](https://s3.amazonaws.com/static.revolutionparts.com/assets/images/mopar.png)
Liquid Line to Drier & Condensor. Contains 5103428AA- Gasket and 5102355AA - O-Ring. Discharge. To Compressor and Condenser.
![Mopar](https://s3.amazonaws.com/static.revolutionparts.com/assets/images/mopar.png)
[xdk,nmb,nmc]. With Drier - NOTE: 25 pc min Qty Mix and Match Pallet Program only, Use mopar.com to order, Magneti-Marelli Parts tab.
![Mopar](https://s3.amazonaws.com/static.revolutionparts.com/assets/images/mopar.png)
With Drier - NOTE:25 pc min Qty Mix and Match Pallet Program only, Use mopar.com to order, Magneti-Marelli Parts tab.
![Mopar](https://s3.amazonaws.com/static.revolutionparts.com/assets/images/mopar.png)
With Drier - NOTE: 25 pc min Qty Mix and Match Pallet Program only, Use mopar.com to order, Magneti-Marelli Parts tab.
![Mopar](https://s3.amazonaws.com/static.revolutionparts.com/assets/images/mopar.png)
Bracket to Roof Panel. Tube to front Cover. Striker Attaching. M6x1x16. to front cover. Timing Chain Guide To Cylinder Head. Sunroof Module to Roof.
![Mopar](https://s3.amazonaws.com/static.revolutionparts.com/assets/images/mopar.png)
Hose Clamp
Power Steering Hose To Reservoir and Pump. 26 mm Diameter. [Open DIameter = M26.0 THK=1.30]. Oil Cooler To Water Inlet. Return Hose to Pump.
![Mopar](https://s3.amazonaws.com/static.revolutionparts.com/assets/images/mopar.png)
Nut
M6x1.00. Throttle Body Shield to Intake Manifold. Heater return tube to engine. Rod to Lever Assembly. Engine Oil Level Indicator Tube. Accelerator Pedal Assembly to Dash Panel. M6. Quantity Of 4 Is Needed. Parking Brake Cable Guide to Floor Pan.